top of page
Furman Power.png

Furman Power Conditioners

For over 40 years, Furman products have been the power behind nearly every major recording studio, performance venue, touring artist and discrimination, passionate audiophile worldwide.

 

The automatic, renowed choice of audio, video and broadcast pros for power conditioning, protection and distribution. Furman products are always there, behind the scenes, powering the entire performance.

While we carry many other Furman products, on this page we are featuring only the three most popular that we sell.
 

Furman IT-Ref 15l.PNG
Furman P-8-PRO-C_2.jpg
PST-8.jpg

Furman IT-Ref 15i  

Furman IT-Ref 15l.PNG
Furman IT-Ref 15l - rear.PNG

Description

​

The IT-REFERENCE 15i features comprehensive, virtually maintenance-free protection from voltage spikes and surges. This assures the highest level of AC protection possible, without sacrificing itself when the offending surge is severe — no damaged equipment, no service calls, no down time.

 

The Discrete Symmetrical Power features total isolation between the filtered-high current outlets, and the isolated symmetrical power AC outlet banks. This positively breaks noise-inducing ground loops, hum bars, and power supply backwash between critical interconnected equipment, all without compromising electrical safety. Furman’s newly refined Dual-Screen Transformers yield the widest bandwidth of noise-reduction possible. This enables the IT-Reference 15i to uncover unprecedented levels of video and audio detail, while insuring that plasmas, LCD screens, or video projectors are free of AC ground contamination from an audio processor or power amplifiers.

Today’s AC lines are plagued with ever increasing noise. When AC noise couples into your system’s critical components, it masks low level signals and cripples performance. This low level content is critical because it relays the crucial harmonics and ambience in audio, and the depth and clarity in video. With Furman’s exclusive Linear Filtering Technology, CD players, pre-amplifiers, satellite receivers, and scalers are fed linearly-filtered AC power. This dramatically reduces noise, ensuring consistent peak operation regardless of load conditions or the time of the day. For the first time, you will see and hear your theater or audio system as it should be — uncompromised.


Additionally, the IT-REFERENCE 15i employs our unique Power Factor Technology circuit. With this technology, low-level analog, digital, and video components are not modulated or distorted via the power amplifier’s extreme AC current demands. Instead, the power amplifier sees a highly filtered, extremely low-impedance supply of AC power.

​

In fact, the IT-REFERENCE 15i has in excess of 4 Amps of continuous current reserve (over 55 amps peak charge) for the most extreme peak power demands. This technology enables power amplifiers and powered subwoofers to operate at peak efficiency and reach levels of performance previously unattainable.

​

No longer will your amplifier’s performance be at the mercy of your homes incoming AC power or inferior AC protection/filtering devices. The net effect is as if your power amplifier virtually doubled in power and improved immeasurably in quality.

Features
 

  • Discrete symmetrical power with dual screen technology cancels hum-inducing noise from audio and video

  • Power Factor technology provides surplus current for power-starved amplifiers

  • Linear Filtering Technology (LiFT) for unequaled audio / video clarity

  • Series Multi-Stage Protection (SMP) provides maximum AC surge suppression with Extreme Voltage Shutdown (EVS) and high current TVZ-MOV

  • Three HD ready bidirectional coaxial surge suppression modules

  • Detachable surge suppression module for telco and cable / satellite connectors

​

Specifications

​

General​

  • Line Voltage120 (Volts)

  • Number of Outlets - 9

  • Number of Isolated Banks - 2

  • Outlet Descriptions

    2 (discrete symmetrical outlets)

    5 (linearly filtered outlets)

    4 (Power Factor Technology outlets, 4.5 amps RMS reserve, reactive load, over 55 amps pk. charge)

  • Dimensions4" H x 17" W x 15.625" D (Standard 2 RU height without feet)

  • Weight50 lbs

  • Power Consumption - 8.5 Watts for display and control circuits independent of actual load

  • Dimensions - 4" H x 17" W x 15.625" D (Standard 2 RU height without feet)

  • Weight - 50 lbs

  • Power Consumption - 8.5 Watts for display and control circuits independent of actual load

​

AC Protection

  • AC Protection TechnologyExtreme Voltage Shutdown
    Series Multi-Stage Protection
    Non-sacrificial protection with zero ground contamination

  • Maximum Current Rating15 (Amps)

  • Initial Clamping Level - 188 VAC peak @ 3,000 Amps

​

Filtration

  • Filtration TechnologyLiFT, Discrete Symmetrical Power with Dual Screen Technology

  • Filtration Rating

    Tranverse (Differential) Mode:
    > 40 dB from 10 kHz – 100 kHz
    > 80 dB from 100 kHz – 1GHz
    (Linear attenuation curve from 0.05 – 100 ohms line impedance)

    Common Mode (video outlets):
    > 75 dB, 10 Hz – 50 kHz
    > 40 dB 50 kHz – 1 MHz

  • Signal Line Protection - 1 Tel and 3 Cable/Satellite

​

Furman P-8 PRO C

Furman P-8-PRO-C_2.jpg
Furman P-8-PRO-C_rear.jpg

Description

​

The P-8 PRO C from Furman brings together superior protection and outstanding performance in a sturdy, rack-mountable design. The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world’s most advanced and comprehensive transient voltage surge suppressors.

​

With Furman’s advanced Linear Filtering Technology you’ll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman’s advanced advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it’s enough to power your whole home studio.

Features
 

  • SMP+ with extreme voltage shutdown

  • LiFT (Linear Filtering Technology) with zero ground contamination

  • Eight rear panel outlets and one front panel outlet

  • 2400 Watt rating, with a high in-rush 20 Amp circuit breaker

  • BNC connector on the rear panel allows you to attach any standard (12V 0.5 Amp) goose-neck lamp to illuminate the rear of your rack

  • Rugged road-worthy steel chassis

  • 10 foot power cord with NEMA 5-20P plug

​

Specifications

​​

General

​

  • Line Voltage - 120 (Volts)

  • Number of Outlets - 9

  • Number of Isolated Banks - 2

  • Outlet Descriptions - All 9 outlets linearly filtered and surge protected

  • Rack MountableYes

  • Control - Front panel On/Off switch

  • Compliance - CSA UL1449, CE, NRTL-C

  • AC Power Cord - 10 foot power cord with NEMA 5-20P plug

  • Dimensions - 19" W x 10.5" D x 1.75" H

  • Weight - 12 lbs

  • Power Consumption - 12 Watts

​

AC Protection​

  • AC Protection  - TechnologyExtreme Voltage Shutdown
    Series Multi-Stage Protection
    Non-sacrificial protection with zero ground contamination

  • Under-Voltage Shutoff - 90V

  • Over-Voltage Shutoff - 140 VAC

  • Maximum Current Rating - 20 (Amps)

  • Initial Clamping Level - 188 VAC peak @ 3,000 Amps

 


Filtration

  • Filtration TechnologyLiFT

  • Filtration Rating
    10 dB @ 10 kHz  /  40 dB @ 100 kHz  /  100 dB @ 10 MHz

Furman PST-8 

PST-8.jpg

Description
 

The PST-8 all feature Furman’s SMP circuit which incorporates Linear Filtering Technology (LiFT) and a high current TVZ-MOV to insure that any electronic device (including televisions, projectors, CD-DVD players, or computers) is fed clean, filtered AC power. This dramatically reduces noise, ensuring consistent peak performance from your equipment.
 

Typical AC filters feature antiquated non-linear circuits. Though these multiple stage filters or power cleaners reduce some noise, they do so unevenly. In fact, they can add noise to your power line due to their filter’s excessive resonant peaking. With Furman’s proprietary Linear Filtering Technology (LiFT), AC noise is suppressed evenly, assuring maximum performance from your system.

Features
 

  • SMP provides the highest level of protection available

  • LiFT significantly reduces AC line noise

  • E.V.S. protects equipment from dangerous overvoltage conditions

  • Zero ground contamination circuitry assures the delivery of pure AC power thus protecting critical audio/video components

  • Cable satellite and Telco connectors deliver advanced protection to connected equipment

  • Sturdy Aluminium chassis

​

Specifications

​

General​

  • Line Voltage - 120 (Volts)

  • Number of Outlets - 8

  • Outlet Descriptions - All 8 outlets filtered and surge protected

  • Control - On/Off control to all outlets through power switch.

  • Compliance - C-UL (UL standard #1449, #1363)

  • AC Power Cord - 8ft captive power cord with 36 degree NEMA 15 plug

  • Dimensions3.75″ W x 17.75″ D x 2.7″ H

  • Power Consumption - 6 Watts

​

AC Protection

  • AC Protection TechnologyExtreme Voltage Shutdown
    Series Multi-Stage Protection
    Non-sacrificial protection with zero ground contamination

  • Over-Voltage Shutoff - 135 VAC

  • Maximum Current Rating - 15 (Amps)

  • Initial Clamping Level - 188V Peak

​

Filtration

  • Filtration TechnologyLiFT

  • Filtration Rating> 40 dB from 150 kHz – 100 MHz > 80dB from 100 kHz – 1GHz

  • Signal Line Protection - 1 Tel and 1 Cable/Satellite

​

bottom of page